01270 623 566
FLOW METER
Sensors can be used as a free standing unit mounted in a carry frame, or can be mounted on the applicator. Flow sensors are mounted between 100mm PN16 flanges and simply require a 12v power connection.
​
With a hard elastomer rubber lined bore, the MAG 5100W Magflo meter is suitable for all effluent and slurry applications including those with very low flow rates. It is available from DN25 to 1200 (1 inch to 48 inch). The kit is supplied as standard complete with integral grounding electrodes.
​
The hard lining guarantees consistent accuracy throughout the temperature and pressure range, whilst the soft elastomer facing provides high abrasion resistance and eliminates the need for gaskets. It is highly resistant to a wide range of chemicals.
​
The MAG 5000 flow meter transmitter is suitable for more demanding applications where cost-effectiveness is important. It boasts the flexibility of being mounted directly on top of the flow meter, or remote mounted to prevent damage from vibration or external stress, and has superior signal resolution.
KROHNE FLOW METER
The OPTIFLUX 2000 is designed to meet the demands for all water and waste water applications including groundwater, potable water, waste water, sludge, sewage and slurry. The OPTIFLUX has a field proven and unsurpassed lifetime. This is assured by the fully welded construction, full bore pipe, absence of moving parts and wear resistant liner materials.
​
The electromagnetic signal converter IFC 050 is a perfect choice for measuring volumetric flow in various kinds of applications in the water industry including dirty water and slurry.
The signal converter can be combined with the flow sensor OPTIFLUX 2000.
​
Options are available for in cab monitoring and recording of spreading volumes including tractor speed monitoring.
